Catalina is pretty clear today.
It's warm but not too warm (low 70s).
Windy though.
The flags are waving...
Tuesday, October 25, 2022
Saturday, October 22, 2022 -- Fall Fling Mopar @ Woodley Park -- Part 3
Don't know what this is on the rear quarter panel...
Cool script badges
Almost European looking instrument panel
Maybe the thickest seat back I've ever seen.
Looks about 10 inches thick.
Aluminum Drawer Unit -- Continued cleaning...
There's staining on the edges/frame and on the drawer fronts.
Looks like some sort of black paint spilled on the lower left of the picture.
Cleaned the edges and some of the drawer fronts.
Still needs a bit more cleaning...
Cassette cleaning & install...
Soaked the cassette in Simple Green for a couple of days.
Then cleaned all the gears with a tooth brush.
Rinsed all the parts with water then set them out to dry.
Hub ready to accept the cassette.
Lubricated the hub and installed the first spacer (silver).
Gears 10, 9 & 8.
28, 24 & 21 teeth.
These gears are one assembly, riveted together.
The "ribs" on the hub are designed such that the gears only go on in one position and in only one orientation (can't install any of the gears "inside-out").
Gear 7
Gear 6
Gear 5
Spacer between gears (black).
Gear 4
Gear 3
Gear 2 (12 teeth)
Gear 1 (11 teeth)
Lubed the threads for the lock-ring.
Lock-ring hand threaded on.
Lock-ring tool.
Tightened the lock ring.
Cleaned and installed the skewer.
Ready to install on the bike.
Subscribe to:
Posts (Atom)