Monday, September 30, 2019

Vintage Snap-on Tool Chest -- Cleaning & Repair -- Part 1

In the process of cleaning.  Just getting the surface dirt and rust off.  Will keep the "patina'd" look. 

After cleaning in the sink, using some chemical cleaner/protectant. 

Cleaned the tray that goes inside the top of the box. 


Done with the exterior cleaning. 





The interior needs cleaning. 

Will clean but keep the patina (will not paint). 


The bottom of the box where the lid's locking mechanism catches is bent.  Will have to fix it... 

Took the drawers out to clean the inside.  The drawer slides need some repair also (one side of the top drawer doesn't stop and the bottom drawer doesn't stop at all & just pulls out...) 

Very dirty inside... 

The finish on the back of the box is probably the original finish that the whole box had initially.  It appears to be a blue/gray hammer type of finish...

NOS Bell Helmet Visor Pivot Wrench -- They still make & sell these





Aircraft Toggle Switch Covers (2 older used ones and three NOS ones)

These would look and work well on some sort of a custom dash or switch assembly...





Long Beach Motorcycle Swap -- 8/25/19 -- Used Triumph Tank Knee Pad -- Part 20


Andersen Plywood Tool Swap Meet -- Saturday, August 17, 2019 - Small Wedge -- Part 7





After initial cleaning



After final cleaning.  This type of small metal wedge comes in handy in many situations.  I've already used it to help pry something apart...




Glendale Toy Show -- Saturday, August 17, 2019 -- Monaco mini souvenir license plate -- Part 28



Long Beach Car Swapmeet -- Sunday, August 4, 2019 -- 360 Badge -- Part 35






After cleaning



Pomona -- August 11, 2019 - Fiat(?) Steering Wheel -- Part 44




























After cleaning

The wheel cleaned up nicely but the steel spokes could do with a repaint of the black...