Saturday, January 2, 2021

Lights for the back yard...

I had removed this light assembly from the back yard a long time ago (several years!).
I remember I removed it because something wasn't working on it.
Can't remember what!

It hangs near the concrete patch where the pergola used to be.
The pergola wood had gotten rotten so I removed it about a year ago...

Finally got the motivation to put it back & fix whatever is wrong with it.


The upper red arrow points to the circuit breaker for the outdoor light that's attached to the house.
The bottom red arrow points to the 220V circuit that goes to the garage.
The pergola area light is wired into the garage so the garage circuit breaker (bottom red arrow) has to be on for the pergola light to work.


After installing the light, only one of the two bulbs lit up.


The bulb is burn't out.
It says GY63 on the bulb.
Went to the local hardware store & found the same type of bulb for 120V (there was a very similar bulb with the same number for a 12V system also...).

 Installed the new bulb.





No comments:

Post a Comment