 |
| The front brake cable is routed along the handlebar, like the rear. On both sides, a few pieces of electrical tape is used to hold the brake cable housing in place, prior to installing the bar tape. |
 |
| The front brake cable housing is routed pretty directly to the front brake assembly. There just needs to a little bit of slack to allow for movement for steering, for when the front wheel turned to the left (when turned to the right, there's actually less slack required). |
 |
| View of the full path of the front brake cable housing. |
 |
| The cable was clamped to the brake with the proper adjustment for the brake shoes to wheel gap. |
 |
| The cable was cut to length and a cap was crimped on the end of the cable to keep it from unraveling. |
No comments:
Post a Comment