 |
| Cut the brake cable housing to length. Sanded the end smooth. |
 |
| Rear brake cable routing around the headtube. |
 |
| Used the two cable clamps to hold the rear brake cable in place. |
 |
| Adjusted the cable so that the brakes have just enough clearance. The closer the clearance, the less "play" in the brake lever, before the brakes apply. Need to cut the cables to length and add the cable cap. |
 |
| Cut the cable to length (about 1.5 inches past the clamp). |
 |
| Crimp on the cable end cap (using pliers). Front is done. |
 |
| Did the same for the rear brake cable. Done. |
