Thursday, December 19, 2019
 |
| LH side (front derailleur) shifter components, after cleaning. |
 |
| Special, non-rotation washer for the inboard side. |
 |
| Washer installed. |
 |
| Special non-rotation washer for the outboard side of the shifter (installed). |
 |
| Outer part with slot to orient the shifter. |
 |
| The locking bolt & tension adjuster. |
 |
| Started installing... The indexing slot has not engaged yet. |
 |
| Slot indexed and adjusting bolt tightened. Installation complete. |
 |
| Lubed and installed the rear derailleur shifter (this side is fastened by a slot head screw). |
 |
| The rear derailleur shifter can be used as "indexed" for "friction." Indexed had detents for each of the 6 speeds. The rubber band is there to keep the front wheel from rotating during assembly... |
 |
| Both shifters installed (ready for the cable installation). |
Crank Arms (Shimano FC-6207 175 mm crank arm length) -- Cleaned and ready to be installed on the Paramount
 |
| On this part and also on the drive side crank, sanded some of the larger scratches then used steel wool. Overall, it looks presentable... |
Group of wood handled tools (before & after staining)
After applying wood stain (cherry finish). After some drying, the Danish oil/stain is rubbed with a clean towel.
Subscribe to:
Posts (Atom)