Got an Acura A-spec steering wheel at a swap meet.
Came with the entire column (which I didn't want).
Taking it apart to separate the steering wheel.
There's two Torx head screws on the side of the wheel/airbag to release the airbag from the wheel (not shown).
Once the two screws are removed, the airbag is loose.
Just need to release the three connectors.
To release the airbag inflator connectors, you pull up on the two small white "tabs" on either side of the connector.
The wheel is held in place with a very large Allen head bolt.
Older cars either used a large nut or a normal hex head bolt.
Airbag removed.
