Sunday, May 29, 2022 -- Long Beach Antique Swap Meet -- Part 1 -- 405 South - Looks empty...

Don't know how fast I'm going.

I stay in the #3 lane @ about 4,000 RPM.

I'm guessing that it's somewhere between 60 and 65 MPH...

Some of the cars passing me seem to be going 15 to 20 MPH faster.

Once in awhile, I pass a car going even slower or a truck, but it's rare.

 

Fixing a small dry erase board (about 8.5" x 11")

CM uses these small dry eraser boards in her classroom.

This one's cover separated from the board.

The glue gave up...

There's one spot where the MDF material came off and is still stuck on the back of the metal surface.

Used a razor blade to take off the stuck-on MDF material.

Used contact cement to fix it.

Allowed the contact cement to dry to the touch (about 10 to 20 minutes).

The problem with contact cement is that you get one shot!

There's no "adjusting" if the alignment is wrong.

Got lucky and it's just about right.

All fixed.

Sunday, May 22, 2022 -- Marina Del Rey -- Busy. Boats going in and out of the marina. Bike path is also busy...

 

Sunday, May 22, 2022 -- Long Beach Motorcycle Swap Meet -- Part 6 -- 1968 VW Type 3 Speedometer

1968 VW Type 3 speedometer.

Has a gas gauge built-in.

Other than being dirty, the gauge seems to be in decent condition.

The needle isn't broken, the indicator film is intact (although somewhat faded) & the graphics look crisp.

Like the Porsche gauges, the trim ring is very difficult to remove.

Part #:  113957023B (113 stands for type 3)

5.68 (housing made in May of 1968)

The paint/ink marking for when it was installed in a car is not readable.

Most likely towards the end of the 1968 model year.

 

Saturday, May 21, 2022 -- Culver City Old Tool Swap Meet -- Part 7 - Plomb 3/16" X 1/8" Punch

 

Cobra - The Shelby American Original Archives 1962-1965 -- Part 14