 |
| I applied a penetrant before removing these screws, just in case. The top screw was somewhat corroded and took some effort to remove. Luckily, the threads were not damaged. The bottom screw came off easily. The top one is subject to more of my sweat... |
 |
| This is the penetrant I used before removing the screws. |
 |
| These are the mounting screws that hold the bottle (no cage). |
 |
| The bottle has built-in "clips" to attach to the "studs" on the bike. I had bought this a long time ago but finally got around to trying it out. |
 |
| On the downtube, I have a "normal" bottle cage. |
 |
| This is how the bottle looks when mounted to the seat tube. I was a little concerned that it would not be secure when riding over rough pavement. I've used it several times so far and it seems to be very secure. |
No comments:
Post a Comment