Monday, May 18, 2020

Garage Organizing - part 15 - Blue Kennedy Tackle Box, Work clothes & LH lower Cabinet


Model car & boxes in the bottom drawer

The top drawer is too shallow for much.  It could be used to store 1/87 scale model cars (perhaps in the future).

Original Kennedy label.  These tackle boxes are made of high quality aluminum and plastic so they don't have corrosion issues when used near or on the ocean.  This box is pretty rough with dents and lots of paint loss on the outside but is still functional.  The blue is a very attractive color and pretty unusual to have "wrinkle finish" paint in that color.  It would have looks pretty nice when new...

Using this old small travel case for storage

Work clothes...

This is the LH lower cabinet (There are three lower cabinets on the back wall of the garage, plus drawer units at the extreme ends of the counter.  The LH & RH lower cabinets have drawers above them.  The middle lower cabinet is not as tall and does not have a drawer above it, because the counter top is dropped down for the chop-saw.)
Labeling the boxes/cases is very helpful for later... (there's no way I'll remember where anything is...)

Monday, May 11, 2020 -- Marina Del Rey

It's a little cooler (in the high 60s) and more windy today.  The wind blows "in" so riding out to the beach is really tough...

Garage Organizing - part 14 -- Hillco Bin & large scale models in tool box

This is a large hardware bin.  I later filled it pretty much full of miscellaneous hardware that was being stored in other places in the garage... (forgot to take a picture after)

The bin in the previous picture is the gray one with the Hillco fastener warehouse sticker on it (Hillco is a well known local fastener store).

Adding more models into the toolbox with the larger scale cars in it.  This is a Maisto 1/18 scale 550 spyder.

Used the rest of the available space to put 1/43 scale models in it.

Sunday, May 17, 2020

Garage Organizing - part 13 - hardware storage bins and RH back wall cabinet drawers (next to air compressor)

Some miscellaneous hardware in the all black hardware storage bin/cabinet

The previous picture is of what's in the black hardware bin/cabinet.  It will live above the red bins in drawers.
  
Back wall, the right hand most lower cabinet drawers (3).  The bottom drawer.  Mostly air tool related... (the old iron is for when you need heat like working with "glue on" edging...)

Middle drawer.   The two lower drawers are deeper.  Corded tools, a couple of battery drills and heat guns

Top drawer.  This drawer is shallow.  Mostly smaller hardware & screws...

Sunday, May 10, 2020 -- Marina Del Rey

The red tide is still pretty strong...




As on most weekends, the boating activity (and the bike path activity) really picks up...  Not a lot of other outdoor activities are "open" still...

Garage Organizing - part 12 -- stuff being stored in the aluminum ice chest

Using this old ice chest (made of aluminum) to store stuff... 

Mostly brochures in the bottom (very heavy)

A few issues of Cavallino magazine mixed in...

Unbuilt Testors Model 

I might have started on this one in the past... 

This one is partially built (I last worked on it about 25 years ago) 

The ice chest if full and is going to live in the bottom shelf of the tall corner storage cabinet.  Like almost everything else in the garage, it's on wheels...

Saturday, May 16, 2020

Garage Organizing - part 11 -- More large scale models & a drawer in the corner tall cabinet

Larger than 1/18 scale (1/16?) pressed steel model of the car in the driveway (Japanese model).  It's so big, it won't fit in the toolbox where I'm attempting to put a lot of the larger models...

Studebaker pickup (1/18 scale).  Pretty amazing level of detail (I think it's a Franklin Mint model).  The side view mirror looks like it will break off if you look at it too hard...

Franklin Mint Microbus.  Very heavy...

Documenting what's in the shallow pull out drawer of the corner storage cabinet...

Large scale model cars storage...