Just a photo survey of what's still waiting outside to go back in the garage...
Tuesday, May 19, 2020
Monday, May 18, 2020
Garage Organizing - part 15 - Blue Kennedy Tackle Box, Work clothes & LH lower Cabinet
![]() |
| Model car & boxes in the bottom drawer |
![]() |
| The top drawer is too shallow for much. It could be used to store 1/87 scale model cars (perhaps in the future). |
![]() |
| Using this old small travel case for storage |
![]() |
| Work clothes... |
Monday, May 11, 2020 -- Marina Del Rey
Garage Organizing - part 14 -- Hillco Bin & large scale models in tool box
![]() |
| This is a large hardware bin. I later filled it pretty much full of miscellaneous hardware that was being stored in other places in the garage... (forgot to take a picture after) |
![]() |
| The bin in the previous picture is the gray one with the Hillco fastener warehouse sticker on it (Hillco is a well known local fastener store). |
![]() |
| Adding more models into the toolbox with the larger scale cars in it. This is a Maisto 1/18 scale 550 spyder. |
![]() |
| Used the rest of the available space to put 1/43 scale models in it. |
Sunday, May 17, 2020
Garage Organizing - part 13 - hardware storage bins and RH back wall cabinet drawers (next to air compressor)
![]() |
| Some miscellaneous hardware in the all black hardware storage bin/cabinet |
![]() |
| The previous picture is of what's in the black hardware bin/cabinet. It will live above the red bins in drawers. |
![]() |
| Back wall, the right hand most lower cabinet drawers (3). The bottom drawer. Mostly air tool related... (the old iron is for when you need heat like working with "glue on" edging...) |
![]() |
| Middle drawer. The two lower drawers are deeper. Corded tools, a couple of battery drills and heat guns |
![]() |
| Top drawer. This drawer is shallow. Mostly smaller hardware & screws... |
Sunday, May 10, 2020 -- Marina Del Rey
Garage Organizing - part 12 -- stuff being stored in the aluminum ice chest
![]() |
| Using this old ice chest (made of aluminum) to store stuff... |
![]() |
| Mostly brochures in the bottom (very heavy) |
![]() |
| A few issues of Cavallino magazine mixed in... |
![]() |
| Unbuilt Testors Model |
![]() |
| I might have started on this one in the past... |
![]() |
| This one is partially built (I last worked on it about 25 years ago) |
![]() |
| The ice chest if full and is going to live in the bottom shelf of the tall corner storage cabinet. Like almost everything else in the garage, it's on wheels... |
Saturday, May 16, 2020
Garage Organizing - part 11 -- More large scale models & a drawer in the corner tall cabinet
![]() |
| Larger than 1/18 scale (1/16?) pressed steel model of the car in the driveway (Japanese model). It's so big, it won't fit in the toolbox where I'm attempting to put a lot of the larger models... |
![]() |
| Studebaker pickup (1/18 scale). Pretty amazing level of detail (I think it's a Franklin Mint model). The side view mirror looks like it will break off if you look at it too hard... |
![]() |
| Franklin Mint Microbus. Very heavy... |
![]() |
| Documenting what's in the shallow pull out drawer of the corner storage cabinet... |
![]() |
| Large scale model cars storage... |
![]() |
Saturday, May 9, 2020 -- Ganahl Lumber & Marina Del Rey
Garage Organizing - part 10 - Romex & Large Scale Models
![]() |
| 1/18 scale. I have a bunch of larger scale models with no place to display them. Will pack them in one of the tool boxes for storage for now... |
![]() |
| This is basically the car in the driveway, even the color. This large scale plastic model is old and is about 1/18 scale (maybe a little smaller, like 1/20 scale?). |
![]() |
| A wind-up car in plastic, but old (made in USA). It's sitting in the toolbox that other large models are being packed into... |
![]() |
| Super high detail 1/18 scale model of a McRae WRC winning Subaru (this is a "high end" model). |
Subscribe to:
Posts (Atom)





































































