 |
| RH side handle (quite a bit of corrosion) |
 |
| After removing the RH handle |
 |
| RH handle & screws |
 |
| LH handle |
 |
| Corrosion on the LH handle |
 |
| After removing the LH handle, the surface was lightly "sanded" using steel wool |
 |
| There's quite a bit of staining on the LH side panel |
 |
| LH handle parts |
 |
| quite a bit of corrosion |
 |
| The loop part can be separated from the base. |
 |
| RH side handle after cleaning and reinstallation. |
 |
| RH side handle. The wood surface was just cleaned of the steel wool dust. Later, all the exterior wood will get a Danish Oil treatment |
 |
| RH side handle done for now |
 |
| RH side |
 |
| LH side panel. The original finish is pretty stained and deteriorated. Steel wool sanding is turning the surface white... |
 |
| After cleaning off the dust from the sanding... |
 |
| Reinstalled the cleaned LH side handle. The surface finish is turning a little white from the steel wool sanding. |
 |
| Closeup of the LH handle after cleaning. Looks pretty good. |
 |
| Both handles and ends are done (ready for application of Danish Oil... |
No comments:
Post a Comment