  |
| Filed the scratches first |
 |
| Started sanding the scratched area with very fine sand paper. Don't want to get into the non-damaged areas & don't want to sand off the labeling. |
 |
| Still sanding... |
 |
| Started the polishing |
 |
| After the polishing (using very fine steel wool). |
 |
| This is what it looks like under the metal cover. |
 |
| metal cover installed (one very small Phillips screw) |
 |
| Looks pretty good |
 |
| Unless you look closely, the damage is nearly imperceptible. |
This is what the damaged one on the original brake lever looks like. It's pretty much beyond repair...
No comments:
Post a Comment