Old & Rough Tool Case - part 24 -- Damage on the LH side of the case

The LH side of the case has some pretty heavy damage to the leatherette, with big chunks/areas missing the leatherette.

Some of the leatherette is loose...

Needs to be glued down...

Also, there's a lot of white/silver colored splatter on the leatherette.

Close up of the splatter...

Damage towards the back of the case...

The Danish oil has had a couple of days to dry on the case.  It's still not fully set (there's still a slight wetness to the touch).  In a few more days, it will be pretty dry to the touch.

The other Gerstner case that I applied Danish oil on is completely dry to the touch.  Almost feels like a urethane finish.

The old case is fully functional.  It can be used to store stuff...

 

Motor Sport Magazine -- September, 2020 Issue -- couple of interesting tidbits...

Even into the early 1970's, Tyrell's F1 team was based in and out of this large barn...

Article about Don Nichols & the Shadow racing team...

 

Thursday, October 22, 2020 -- Manhattan Beach Pier

Overcast today.  Good riding temperature (about 70 F) but it's windy!

Fought a head/cross wind all the way to the pier (very tiring).

They're handing out the collagen water again.

Didn't like it last time so didn't get any...

They're making pretty good progress on the hillside construction.

The construction looks very solid and the design is not too unattractive...

 

1997 Mercedes-Benz Model Line Brochure

 

Chicken Asada -- BBQ -- From Trader Joes -- Was very tasty!

 

Car & Driver Magazine -- November 1995

In this one issue, there are at least eight pages of ads for the Ford Taurus.  Several are two page spreads.

The main design theme was ovals.  There were ovals all over the car.  The backlite is oval.  The radio/HVAC control panel is oval.  This was pretty radical.  Most cars still used standard (DIN) rectangular radios.

I had completely forgotten about this car.  TOM'S was a Japanese racing/racing-car company.  I don't know if they're still around...  This car is very small, powered by the MR2 twin cam 1.6L engine and weighted around 1,700 lbs.  Sounds like a blast to drive...

The Ferrari F50 powertrain.  Looks fantastic.

I didn't know the F50 had adjustable pedals.  The engineering looks beautiful.

The Mitsubishi Galant gave me the impression of quality, in the day.  I remember driving a Mitsubishi Cordia in the 1980's and it also impressed me with it's quality.

This Oldsmobile Aurora ad is promoting the stiffness of the body.  I wonder if the audience for Oldsmobile really cared about this type of technical advertising...

Mazda was trying to go upscale.   This was a pretty expensive car (cost more than the equivalent Toyota, Honda or Nissan).  It didn't work out well...

This two page spread ad for GM is promoting simple pricing (a little bit like Saturn) and an extensive bumper to bumper warranty.

Another Ford Taurus ad...

The Acura Integra GS-R beat the BMW 318ti in a head-to-head comparison test.  The Acura was significantly faster too.

This is an excerpt from an article on the M3 automatic.  Both are 5 speeds.  But, the manual is much faster to 60 MPH.

Today, this is no longer true.  Most automatic versions of sporty cars are faster than the manual.

I remember the ads for the "twin tire" in the day.  This really didn't go anywhere.

This issue of the magazine had over 211 pages...

 

Old & Rough Tool Case - part 23 -- Removing the top front corner protectors

Removing the top right front corner protector.  The top screw's slot is full of "dirt."  It had to be scraped out first.

The screw was easy to turn...

Both screws came out easily

The corner protector was slighted "glued" to the leatherette by the dirt and corrosion.  It did come off with a little bit of persuasion.

the corrosion on the corner protector and the screw heads is pretty heavy...

The inside of the corner protector also shows some corrosion but also shows that these were probably nickel plated steel.

I put the lock into a glass jar and applied some penetrating oil.

I'm hoping that i may be able to turn the lock with something other than a key, if the mechanism is loosened up...

I think the chances  are low but worth a try.

I'll let it sit for at least a day.

Used this penetrating oil.

Removing the top left front corner protector.  Again, the top screw's slot is completely plugged with dirt.

But, the screw came out with very little torque...

For now, I put the corner protectors and screws in the top left drawer, until I'm ready to clean them on a wire wheel...

The dirt under  the top left front corner protector.