Pretty beat up.
Will straighten it out a bit, later...
Friday, April 2, 2021
White Table Top...
Cleaned the white top on the flat files.
It had several places where the top was chipped and the particle board substrate was visible.
Used a white paint pen to color in those spots.
Looks pretty good now...
Thursday, April 1, 2021
Epoxy... part 5 - Bled out on the good side...
After three days of curing, removed the clamp, plastic and tape.
This is the "good" side (opposite side to the pour side).
The epoxy bled through the tape into the surrounding wood.
Scraped off most of the over-flush epoxy.
Will let it cure on the good side for a day or two then try to sand out the epoxy overflow...
After a day of curing on the good side...
The epoxy is getting hard.
I'll give it another day before sanding...
Moved the 914 Fuchs wheels here for now...
The other two wheels that I have do not have the black paint between the "spokes."
I think it looks better without the two-tone...
Steel Toe Boots...
I've had these for over 15 years.
The sole on the left shoe started separating (glue failure).
Will re-glue...
Wednesday, March 31, 2021
New trash cans for the garage and the small bathroom
The old trash can for the garage took up too much space (footprint).
Got this small one to take up less space (can also be put on top of the cabinet it's sitting next to, once I make some space on top.
It came in a pack of two, so replaced the one in the small bathroom in the house.
Subscribe to:
Posts (Atom)