Monday, November 9, 2020

1993 Nissan 300 ZX Brochure




This plan-view of the car's shape/design is very flattering.


Very cool velum (semi-transparent paper) overlay showing the suspension design/components.


Similar velum overlay for the driver's field of vision.




Unique key for just the 300 ZX.  Very cool design...  I'd like to have just the key.


 

Sunday, November 8, 2020

Old & Rough Tool Case - part 30 -- Gluing down loose leatherette

Gluing down the loose leatherette on the LH side of the case...


This rear edge was loose and was glued down.


These loose threads were also glued down.


After applying glue...


this little spot on the front lid was also loose & was glued down.


Another small spot of loose leatherette towards the front right corner of the case was glued down.


At this point, the "refurbishment/cleaning" is getting near finished.
There's a few more things that can be done:

(1)  Treat the leatherette with some sort of protector with color in it (black) to even out the appearance and darken some of damaged spots to make it less noticeable.
(2) Wrap the handle with some leather (the current condition is such that every time you touch the handle, little bits of material falls off...
(3) Fix the lock & find a key that works so that when the lid is closed, it can be made to stay closed (if I'm not able to make this work, the case will still be functional; it's only an issue when transporting the case)
(4) Clean the corner protector and handle hardware (I'm not sure that I'm going to do this;  I may just leave them pretty much the way they are.  If the hardware gets too "shiny" it will clash with the condition of the rest of the case...  I may just lightly "clean" the rust with a scotchbrite pad to get any loose bits off then just put the hardware back on...)

 

1995 Motor Trend Performance Cars Buyer's Guide

They used to make all kinds of "buyer's guides" for various types of vehicles...


Great colors and layout.


I like this car...


Another great shot...


$62,000 for a Mitsubishi in 1995 ?!?!


Yet again a great shot...


Sounds like an interesting car to drive.
This car has one of the most interesting door hinges on a relatively modern car...


Another car I wish I had a chance to drive...


Don't remember Honda doing this...

 

Friday, October 30, 2020 -- Manhattan Beach Pier (marine layer)

The marine layer (fog) rolling in mid-day at the beach.
Made for good weather for riding...

 

2001 Honda Insight Brochure





This was a very small, two-seat hybrid hatchback.
The main goal was to achieve a very high fuel efficiency, thus it was also designed to be very aerodynamic and light.

It could be the basis of a pretty cool hot rod.  It has everything going for it except for power...


Unusual for a hybrid, it came with a 5-speed manual transmission, with an optional CVT.


The curb weight is listed at 1,847 lbs for the MT version.


Fuel economy is listed as 61/68 MPG (city/highway)!!!  Was this the most fuel efficient gasoline powered production car ever sold?


 

Saturday, November 7, 2020

Old & Rough Tool Case - part 29 -- Finished cleaning leatherette and patent date on the handle hardware

The last side to be cleaned is the RH side leatherette.
The leatherette is in decent condition.


After cleaning.

The leatherette on all sides have now been cleaned to an acceptable level.


Cleaning the handle hold down hardware shows a patent date of:
September 14, 1909
This isn't when the hardware was made.  But, it gives a general idea of when it was made; sometime after 1909.
My previous guess was that the case was made in the late 1920s...


 

November 1994 -- Motor Trend Magazine



All three of these Toyotas are 2-doors.  The Tercel is long gone.  The Celica is also.  The Camry is still around but not as a 2-door.


This is an interesting article about a prototype that Chrysler built of the Dodge Neon using lightweight materials (aluminum, titanium, etc.).  They cut 600 lbs from a car that weighted 2,600 lbs.  So after the lightweighting, it weighted around 2,000 lbs.
All the performance numbers were significantly better...


Renault built some electric vans...  The world & technology wasn't ready...


2 page spread ad by Nissan showing a very large picture of a 1959 Cadillac 2-door hardtop...
Can't see this happening today...


Two cool cars...  One with a motorcycle doing a wheelie and the other with the motorcycle jumping...


120 hp/liter for the 4 cylinder Lotus  (highest specific output at the time)


The first Honda Odyssey.  It was basically a tall station wagon (no sliding doors).  Mazda's first "min-van", I think it was called the MPV, was also a tall wagon (regular doors).


My first year working at the Ford Design Center, one of my assignments was working in the Studio which was working on this car.  They had finished the design and was going through design verification (where the early tooling mock-ups were being verified versus the actual full size clay design; to ensure that the styling was being carried out as it was intended, down to the last details of trims, moldings, etc.).  
I was pretty shocked to see that they had built full size mock-ups of the exterior of the car using the drawings that were created, from the clay, using wood as the medium.  I recall going to see the rear end of the car mocked-up in full size and full detail, to very tight tolerance, in solid wood!
It boggled my mind as to how much work that took...
Plus, when all the verification was done, all the mock-ups would be destroyed!
What a waste, I thought...


2-page spread ad by the tobacco industry against a proposed legislation against indoor smoking...


This article looked back at the year 1965.  The Cobra, according to the article, cost $6,000 at the time.  I think most of the other cars in the article were in the $3,000 to $5,000 range.
A guy I met at GM told me that in the late 60's/early 70's, they still had Cobras that were not sold & they were heavily discounting them to move them.
For the same money, he could buy a Lotus Europa.
Lotus was very successful in F1 at the time.
He thought the Lotus was the better, more high tech car (mid engine, fiberglass body with a central structural wishbone.  Independent suspension, light weight, etc.) and that it would be the better car to have.  So he bought the Lotus.
Who knew at that time that the Cobra would become so collectible.
One day, he brought the Europa into work (at the GM Design Center) and he gave me a ride around the Tech Center at lunch.
It was a very impressive ride, in terms of the ride and handling (amazing cornering...).


Didn't know that the Supra Turbo did 0 to 60 in 4.6 seconds, back in 1994...  Pretty amazing number, even for today...