Mavic Kysirum Wheel -- Finished Cleaning the Spokes & Installed Rim Tape

The spokes should be painted black...

Glendale Toy Show -- Saturday, August 17, 2019 -- Politoys Ferrari Dino -- Part 1

Long Beach Car Swapmeet -- Sunday, August 4, 2019 -- SCCA magazine from September 1976 -- Part 8

Long Beach Model T Swap Meet -- Saturday, July 20, 2019 -- Alfa Romeo Wrench - removed paint -- Part 23

Someone very roughly thinned down the 21 mm end of the wrench.  This end is also very spread open.  The wrench is in very rough condition overall... 

Ground down the 21 mm end so that it's smoother.  Then cleaned the whole wrench some more.  It's still pretty rough but is more presentable...

Whittier Bicycle Swap -- August 10, 2019 - Miele road bike with Shimano 600 group -- Part 4

Pomona -- August 11, 2019 - Part 5

Cleaning Up the Series I Jaguar XJS Instrument Cluster -- reassembly -- Part 8 & last

Turned out pretty presentable after cleaning the gauges and refinishing the wood.

This bracket appears to be to hold the speedometer drive cable in place.  It hangs down below the bottom edge of the wood gauge cluster. 

I turned the bracket around so that it doesn't stick down below the bottom edge of the wood.  It will be better for setting the gauge cluster on a flat surface for display.

I happened to have this tachometer around.  It's actually slightly too small for the hole for the HVAC vent that is supposed to go in that hole.  The chrome trim ring glaringly clashes with the rest of the cluster assembly.  I'll take it out and replace with the vent when I find one at a swap meet...